Traumatic dental injuries in 6 to 12 years old schoolchildren: a multicenter cross-sectional study in Mexico

Abstract The aim of this study was to determine the prevalence of dental trauma in schoolchildren 6 to 12 years of age and associated clinical, sociodemographic, and socioeconomic variables. A cross-sectional study was conducted in 477 children from public elementary schools in four locations in Mexico. The dependent variable was dental trauma, which was dichotomized in 0 = without dental trauma and 1 = with dental trauma. For the statistical analysis, a multivariate binary logistic regression model was generated in Stata. Average age was 9.06±1.94 years and 51.1% were girls. The prevalence of dental trauma was 18.2%. Falls, automobile accidents and sports had the highest number of instances (p < 0.01). In the multivariate model, it was observed that the risk of dental trauma increased with age (OR = 1.28) and among boys (OR = 1.45). Schoolchildren with decreased overjet (OR = 0.38) had lower dental trauma. Father's age (OR = 1.03) and educational level (OR = 1.78) were associated with dental trauma. Schoolchildren without health insurance (OR = 0.62) presented dental trauma less often. This study provided important information regarding the association of different sociodemographic, socioeconomic and clinical variables with dental trauma in Mexican schoolchildren. Identifying factors associated with dental trauma may support health promotion opportunities to ameliorate the prevalence of dental trauma.

Effect of sodium hypochlorite in ground fluorotic enamel: Shear bond strength and surface analysis / Efecto del hipoclorito de sodio en esmalte fluorótico tallado: resistencia adhesiva al cizallamiento y análisis de la superficie

ABSTRACT: Evaluate the effect on the shear bond strength (SBS) of 5% NaOCl applied after acid etching on ground anterior teeth with fluorosis and analyze the surface with scanning electron microscopy (SEM), also compare fluorotic and healthy ground enamel by atomic force microscopy (AFM) and Vickers microhardness (VM). For the SBS test 30 anterior teeth with moderate and severe fluorosis according Dean index were selected by an examiner previously calibrated with an expert in fluorosis by using the intraclass correlation coefficient (ICC). With the help of a calibrated high speed diamond bur for veneer preparation and a parallel chamfer high speed diamond bur he vestibular face was prepared with a uniform reduction of .3 mm under water cooling. In one half of the vestibular face of the teeth the conventional adhesive procedure was carried out while in the other half was added an additional step with 5% NaOCl applied for 1 minute and washing after acid etchant. A resin post was adhered in each half and load was applied until fracture. The failure mode was evaluated and a SEM analysis was made. Posteriorly 10 samples of fluorotic and healthy ground enamel were used to measure the nanostructural characteristics by AFM (roughness average and absolute depth profile) and the VM in three operative steps (after ground, after etchant and after deproteinization). The Shapiro-Wilks and Brown-Forsythe methods were used to test the distribution of variables. The Paired Student's t-test was used to compare the differences between mean bond strength (MPa) in the two groups for SBS test. Chi- square analyzes were performed to compare the failure modes between groups. One- way ANOVA analysis and Tukey-Kramer post hoc test were used to compare groups for roughness average, absolute depth profile and Vickers microhardness. A greater SBS (32.17±4.20 MPa) and a surface more homogeneous and less contaminated were observed in the deproteinization subgruoup compared to the conventional subgroup (27.74±4.88 MPa). AFM parameters were greater in fluorosis subgroup than in healthy enamel subgroup. VM was lower in the fluorotic enamel in each operative step in comparation with healthy enamel. The use of 5% NaOCl as a deproteinizing agent after acid etchant in ground fluorotic enamel results in better adhesion, which may imply greater success in adhesive treatments. The ground surface of fluorotic enamel shows higher values of roughness and depth and lower values of VM which proves that there is a more irregular and less hard surface.

RESUMEN: Evaluar el efecto en la resistencia adhesiva al cizallamiento (SBS) de la aplicación de 5% de NAOCl después del grabado ácido en dientes anteriores fluoróticos tallados y analizar la superficie con microscopía electrónica de barrido (SEM), también comparar esmalte tallado fluorótico y sano por microscopía de fuerza atómica (AFM) y microdureza Vickers (VM). Para la prueba SBS 30 dientes anteriores con fluorosis moderada y severa de acuerdo al índice de Dean fueron seleccionados por un examinador previamente calibrado por un experto en fluorosis usando el coeficiente de correlación intraclase (ICC). La cara vestibular se preparó .3mm con la ayuda de una fresa calibrada para la preparación de carillas y una paralela con punta en chamfer de diamante a alta velocidad e irrigación. En una mitad de la superficie vestibular de los dientes se llevó a cabo el procedimiento adhesivo tradicional, mientras que en la otra mitad se incluyó un paso adicional con la aplicación de NaOCl al 5% por un minute y lavado posterior al grabado ácido. Un poste de resina fué adherido en cada mitad y se aplicó carga hasta la fractura. Se evaluó el modo de fallo y se realizó un análisis con SEM. Posteriormente se utilizaron 10 muestras de esmalte tallado fluorótico y sano para medir las características nano estructurales por medio de AFM (rugosisdad promedio y perfil de profundidad absoluta) y la VM en tres diferentes pasos operativos (posterior al tallado, posterior al grabado ácido y posterior a la desproteinización). Se utilizaron los métodos de Shapiro Wilks y Brown-Forsythe para conocer la distribución de las variables. Una T de student pareada se utilizó para comparar la diferencia entre los promedios de la fuerza de unión (MPa) entre grupos para la prueba SBS. Se llevaron a cabo análisis de chi cuadrada para comparer los modos de fallo entre los grupos. Análisis de ANOVA de una vía y Tukey-Kramer post hoc fueron utilizados para comparar los grupos para las variables rugosidad promedio, perfil de profundidad absoluta y microdureza Vickers. Se observó una mayor SBS (32,17±4,20 MPa) y una superficie más homogénea y menos contaminada en el subgrupo con desproteinización en comparación con el subgrupo convencional (27,74±4,88 MPa). Los parámetros de AFM fueron mayores en el subgrupo de fluorosis que en el subgrupo de esmalte sano. La VM fue más baja en el esmalte fluorótico en cada paso operativo en comparación con el esmalte sano. El uso de NaOCl al 5% como agente desproteinizante después del grabado ácido en el esmalte fluorótico tallado da como resultado una mejor adhesión, lo que puede implicar un mayor éxito en los tratamientos adhesivos. La superficie tallada del esmalte fluorótico muestra valores más altos de rugosidad y profundidad y valores más bajos de VM lo que prueba que existe una superficie más irregular y menos dura.

Expression of calcitonin gene-related peptide and pulp sensitivity tests in irreversible pulpitis

Abstract The aim of the present study was to identify the relationship between the expression of calcitonin gene-related peptide (CGRP) and the responses of pulp sensitivity tests in healthy pulps and irreversible pulps by performing a cross-sectional study on patients. Two hundred subjects were evaluated. A total of 75 subjects complied with the criteria. The participants were divided into two groups: a) Healthy pulp (subjects [n = 35] having posterior teeth with clinically normal pulp tissue), and b) Irreversible pulpitis (subjects [n = 40] having posterior teeth with irreversible pulpitis). All participants were evaluated using the following variables: a) medical and dental history, b) pulp sensitivity tests, c) expression of CGRP by the enzyme-linked immunosorbent assay (ELISA), and d) expression levels of mRNA CGRP and mRNA CGRP receptor genes. We determined that the responses of the cold test between 4 and ≥12 s presented a higher average of the expression of CGRP in the group having irreversible pulpitis (p = 0.0001). When we compared the groups with the value of the electrical impulse, we found statistically significant differences (p = 0.0001), observing positive responses to the test with electrical impulses of 7 to 10, with an average of 72.15 ng/mL of CGRP in the irreversible pulpitis group. High values of CGRP expression were observed in that group in the responses of pulp sensitivity.

Identification of the Most Appropriate Site for the Cold Test in Molar Teeth / Identificación del sitio más apropiado para la prueba de frío en dientes molares

Abstract A test frequently used to complement endodontic diagnoses is the cold test; however, in the last 20 years, authors have reported incorrect results within pulp sensitivity tests. Specifically, a high frequency of false results in posterior teeth, were found. The aim of this study was to identify the most appropriate site for the cold test in molar teeth with a need for endodontic treatment, calculating predictive values, accuracy and reproducibility. A cross-sectional study was performed, evaluating 390 subjects. A total of 152 subjects of both genders from the ages of 15-65 years old participated. The ideal standard was established by direct pulp inspection, and the cold test agent used was 1,1,1,2-tetrafluoroethane. The patients were divided into four groups in relation to the molar tooth: (1) mandibular first molar, (2) mandibular second molar, (3) maxillary first molar, and (4) maxillary second molar. 169 teeth and 676 sites were studied. (a) The most appropriate sites for cold test were the middle third of the buccal surface and cervical third of the buccal surface in the mandibular molars with the following results: Middle third of the first molar: Accuracy 0.93, positive predictive value 0.90 and negative predictive value 0.96. Middle third of the second molar: Accuracy 0.93, positive predictive value 1.00 and negative predictive value 0.90. In relation to third cervical the results were: First molar: Accuracy 0.93, positive predictive value 0.89 and negative predictive value 0.97 y second molar: Accuracy 0.93, positive predictive value 1.00 and negative predictive value 0.90. (b) The highest reproducibility was observed in the middle third of the buccal surface with cervical third of the buccal surface in the mandibular second molar (1.00). The most appropriate site and reproducibility of the sites are auxiliary to complement endodontic diagnose with the cold test.

Resumen Una prueba frecuentemente utilizada para complementar los diagnósticos endodónticos es la prueba de frío. Sin embargo, en los últimos 20 años, los autores han reportado resultados incorrectos con las pruebas de sensibilidad pulpar. Específicamente, se ha observado una alta frecuencia de resultados falsos en dientes posteriores. El objetivo del estudio fue identificar el sitio más adecuado para la prueba de frío en dientes molares con necesidad de tratamiento endodóntico, calculando valores predictivos, exactitud y reproducibilidad. Se realizó un estudio transversal donde se evaluaron a 390 sujetos. 152 sujetos de ambos sexos de 15 a 65 años cumplieron con los criterios de inclusión. El estándar ideal que se utilizó en el estudio fue la inspección directa de pulpa en la cámara pulpar y la prueba de frío utilizada fue el 1,1,1,2-tetrafluoroetano. Los pacientes fueron divididos en cuatro grupos en relación al diente molar: (1) primer molar mandibular, (2) segundo molar mandibular, (3) primer molar maxilar, y (4) segundo molar maxilar. En el estudio se evaluaron 169 dientes con 676 sitios. (a) Los sitios más adecuados para la prueba de frío fueron el tercio medio y el tercio cervical de la superficie bucal en los molares mandibulares con los siguientes resultados: Tercio medio del primer molar: Exactitud 0.93, valor predictivo positivo 0.90 y valor predictivo negativo 0.96. Tercio medio del segundo molar: Exactitud 0.93, valor predictivo positivo 1.00 y valor predictivo negativo 0.90. En relación al tercio cervical los resultados fueron: Primer molar: Exactitud 0.93, valor predictivo positivo 0.89 y valor predictivo negativo 0,97 y segundo molar: Exactitud 0.93, valor predictivo positivo 1.00 y valor predictivo negativo 0.90. (b) La más alta reproducibilidad (1.00) se observó entre el tercio medio con el tercio cervical de la superficie bucal en el segundo molar inferior. El sitio más apropiado y la reproducibilidad de los sitios son auxiliares para complementar el diagnóstico endodóntico con la prueba de frío.